Search

Starwax

Concentrated wood deck degreaser

Ideal for degreasing and deep-cleaning wooden decks

Restores wood to its original appearance

Can be used before renovation (with a saturator, for example)

If the soil remains rough, use before and after the season.

Suitable for wooden decking, outdoor flooring and gratings

2L= 60 to 120m² depending on the degree of soiling

Thoroughly cleans wooden decking

brillanceOver time, dirt builds up on deck boards. Concentrated Wood Deck Cleaner thoroughly cleans the boards and restores their original appearance. The deck is thoroughly cleaned before it can be renovated.

Removes greyness

retire la grisailleThe sun’s rays and inclement weather dull the wood of your deck, the greyness sets in and your deck looks grey. Thanks to its concentrated formula, Degreaser removes the dullness from the boards before protecting and nourishing with High Protection Wood Decking Saturator . If the floor remains unfinished, use before and after the season.

Degreases wooden decking, outdoor flooring and duckboards

Starwax Concentrated Degreaser is suitable for wooden decks, floors and outdoor duckboards. With a 2L can, you can achieve between 60 m² and 120 m², depending on how dirty the wood is.

Made in France

fabriqué-en-franceThis product was developed near Lille, the birthplace of Starwax. And whether it’s made in one of our factories or by one of our subcontractors, it’s been carefully manufactured in France.

How to use Concentrated Straightener

READ IMPERATIVELY BEFORE USE

  • Adjust the level of dilution according to how dirty the terrace is
  • On lightly soiled surfaces: Dilute the product 25% with water (i.e. 1 litre of degreaser for 3 litres of water).
  • On heavily soiled surfaces: dilute to 50% (i.e. 1 litre of degreaser for 1 litre of water).
  • Apply the degreaser to the wood using a garden sprayer or watering can.
  • Avoid applying in direct sunlight.
  • Leave for 10 to 15 minutes.
  • Remove dirt by scrubbing with a brush.
  • Rinse immediately with clean water (from a hose) while brushing.
  • Do not allow to dry without rinsing.
  • Repeat the operation until all the greyness has been removed.
  • Before applying any finish, wait 24 hours for the wood and treated surface to dry completely.

Recommendations

  • If no finish is applied, repeat the treatment by applying the product undiluted to obtain a preventive effect and delay soiling.
  • Rinse with a damp mop.
  • Application with a high-pressure cleaner is possible: check beforehand any contra-indications from the manufacturer with acid products.
  • Do not apply to metal or acid-sensitive surfaces.
  • Avoid spraying on plants.
  • Do not allow to run into swimming pool water or water collection systems.
  • Rinse application equipment thoroughly.
Reference : 336
EAN13 : 3365000003367

Recommended products